fifotrack protocol
TrackeraX decodes the fifotrack protocol on port 6124. These are the devices that use it, the data it reports and the commands you can send to them.
- Port
- 6124
- Models
- 17
- Brands
- 1
Devices that use fifotrack
- Fifotrack A500G
- No brand Fifotrack A100
- Fifotrack A100/A200
- Fifotrack A200
- Fifotrack A300
- Fifotrack A500
- Fifotrack A600
- Fifotrack A700
- Fifotrack Q1
- Fifotrack Q2
- Fifotrack Q3
- Fifotrack S20
- FIfotrack S30
- Fifotrack S50
- No brand Fifotrack S60
- Fifotrack S70
- Fifotrack R18
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom - Request photo
requestPhoto
Data reported by the fifotrack protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Battery level
batteryLevel - Card
card - Driver ID (RFID / iButton)
driverUniqueId - Engine hours
hours - Photo
image - Digital inputs
input - Odometer
odometer - Digital outputs
output - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
Alarms the protocol can report
- Fall
fallDown - Fatigue driving
fatigueDriving - Geofence entry
geofenceEnter - Geofence exit
geofenceExit - GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Idling
idle - Jamming
jamming - Low battery
lowBattery - Low power
lowPower - Overspeed
overspeed - Power cut
powerCut - Power off
powerOff - Power on
powerOn - Power restored
powerRestored - SOS
sos - Temperature
temperature - Vibration
vibration