navis protocol
TrackeraX decodes the navis protocol on port 6019. These are the devices that use it, the data it reports and the commands you can send to them.
- Port
- 6019
- Models
- 39
- Brands
- 2
Devices that use navis
- No brand CH-4713
- Navis CH-5703
- Navtelecom S-2437
- Navtelecom S-4752
- Navis Signal S-2115
- Navis Signal S-2117
- Navtelecom Signal S-2550
- Navtelecom Signal S-2551
- Navis Signal S-2613
- Navtelecom Signal S-2651
- Navtelecom Signal S-2652
- Navtelecom Signal S-2653
- Navtelecom Signal S-2654
- Navtelecom Signal S-4651
- Navis Signal S-4751
- Navis Signal S-4753
- Navtelecom Smart S-2330
- Navtelecom Smart S-2332
- Navtelecom Smart S-2333
- Navtelecom Smart S-2333A
- Navtelecom Smart S-2410
- Navtelecom Smart S-2411
- Navtelecom Smart S-2412
- Navtelecom Smart S-2413
- Navtelecom Smart S-2420
- Navtelecom Smart S-2421
- Navtelecom Smart S-2422
- Navtelecom Smart S-2423
- Navtelecom Smart S-2425
- Navtelecom Smart S-2430
- Navtelecom Smart S-2433
- Navtelecom Smart S-2435
- Navis Smart S-4533
- Navis Smart S-4535
- Navis Smart S-4537
- Navis Start S-2010
- Navis Start S-2011
- Navis Start S-2012
- Navis Start S-2013
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the navis protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armed
armed - Axle weight
axleWeight - Battery voltage
battery - Coolant temperature
coolantTemp - Distance
distance - Engine load
engineLoad - Fuel
fuel - Fuel used
fuelUsed - HDOP
hdop - Engine hours
hours - Digital inputs
input - OBD odometer
obdOdometer - OBD speed
obdSpeed - Odometer
odometer - Digital outputs
output - PDOP
pdop - External power
power - RPM
rpm - GSM signal
rssi - Satellites
sat - Visible satellites
satVisible - Service odometer
serviceOdometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Counters (count1, count2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
Protocol-specific attributes
acceleratorPosition · brakePosition · format · freq · fuelTemp · obdAdBlue · obdAdBlueLevel · obdFuel · obdFuelLevel · obdHours · user1Byte · user2Byte · user4Byte · user8Byte