taip protocol

TrackeraX decodes the taip protocol on port 6031. These are the devices that use it, the data it reports and the commands you can send to them.

Port
6031
Models
25
Brands
6

Devices that use taip

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the taip protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltage battery
  • Charging charge
  • Coolant temperature coolantTemp
  • Driver ID (RFID / iButton) driverUniqueId
  • Fuel level fuelLevel
  • Fuel used fuelUsed
  • HDOP hdop
  • Engine hours hours
  • SIM ICCID iccid
  • Ignition ignition
  • Digital inputs input
  • OBD speed obdSpeed
  • Odometer odometer
  • Digital outputs output
  • PDOP pdop
  • External power power
  • RPM rpm
  • GSM signal rssi
  • Satellites sat
  • Throttle throttle
  • Firmware version versionFw
  • Hardware version versionHw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • IO elements (io1, io2…)
  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • Accident accident
  • Harsh acceleration hardAcceleration
  • Harsh braking hardBraking
  • Harsh cornering hardCornering
  • High RPM highRpm
  • Idling idle
  • Low battery lowBattery
  • Overspeed overspeed
  • Power cut powerCut
  • Power restored powerRestored
  • SOS sos
  • Temperature temperature

Protocol-specific attributes

clutchState · cruiseControl · engineBrake · engineTorque · oilPressure · parkingBrake · serial · serviceBrake · tripDistance · tripTime

All protocols · Watch live demo