xirgo protocol
TrackeraX decodes the xirgo protocol on port 6081. These are the devices that use it, the data it reports and the commands you can send to them.
- Port
- 6081
- Models
- 31
- Brands
- 1
Devices that use xirgo
- Xirgo LX40
- Xirgo ST7200
- Xirgo XG37
- Xirgo XT Series
- Xirgo XT-2000G
- Xirgo XT-2050C
- Xirgo XT-2060G
- Xirgo XT-2150
- Xirgo XT-2150C
- Xirgo XT-2150G
- Xirgo XT-2160G
- Xirgo XT-3200
- Xirgo XT-4500G
- Xirgo XT-4550C
- Xirgo XT-4560G
- Xirgo XT-4700
- Xirgo XT-4750C
- Xirgo XT-4760
- Xirgo XT-4850C
- Xirgo XT-4860G
- Xirgo XT-5000
- Xirgo XT-5050C
- Xirgo XT-5060
- Xirgo XT-6200
- Xirgo XT-6260
- Xirgo XT24
- Xirgo XT25
- Xirgo XT31
- Xirgo XT49
- Xirgo XT53
- Xirgo XT63
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output control
outputControl - Custom command
custom
Data reported by the xirgo protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Charging
charge - Fuel
fuel - Fuel consumption
fuelConsumption - HDOP
hdop - Engine hours
hours - SIM ICCID
iccid - Ignition
ignition - Motion
motion - Odometer
odometer - Digital outputs
output - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Alarms the protocol can report
- Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Idling
idle - Low battery
lowBattery - Low power
lowPower - Overspeed
overspeed - Parking
parking - Power cut
powerCut - Power restored
powerRestored - Removal
removing - Towing
tow
Protocol-specific attributes
coolantLevel · coolantPressure · oilLevel · oilPressure · oilTemp