Alematics AP1 on TrackeraX
The Alematics AP1 is a GPS tracker that works with TrackeraX over the alematics protocol on port 6140. From the platform it accepts custom commands.
Technical sheet
- Brand
- Alematics
- Model
- AP1
- Protocol
- alematics
- Port
- 6140
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6140 (alematics protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Alematics AP1 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the alematics protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - HDOP
hdop - Digital inputs
input - OBD speed
obdSpeed - Odometer
odometer - Digital outputs
output - External power
power - RPM
rpm - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Protocol-specific attributes
text
Other Alematics models
- Alematics AE1 Series
- Alematics AE3
- Alematics protocol devices
- Alematics AM1 Series
- Alematics AM3 Series
- Alematics AM7 Series
- Alematics AM7-W
- Alematics AP3
- Alematics AP7
- Alematics AT1
- Alematics AT1-C
- Alematics AT3
Try the AP1 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.