Anytrek VT611 on TrackeraX
The Anytrek VT611 is a GPS tracker that works with TrackeraX over the anytrek protocol on port 6177. From the platform it accepts custom commands.
Technical sheet
- Brand
- Anytrek
- Model
- Anytrek VT611
- Protocol
- anytrek
- Port
- 6177
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6177 (anytrek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Anytrek VT611 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the anytrek protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Charging
charge - Ignition
ignition - Odometer
odometer - GSM signal
rssi - Satellites
sat - Firmware version
versionFw
Other Anytrek models
Try the Anytrek VT611 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.