AOVX VL100 on TrackeraX
The AOVX VL100 is a GPS tracker that works with TrackeraX over the gt06 protocol on port 6023. From the platform it supports engine stop, engine resume and request photo, plus custom commands. The server decodes 30 alarm types from this protocol, such as accident, door and fall.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6023 (gt06 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the AOVX VL100 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Request photorequestPhoto
- Reboot devicerebootDevice
- Custom commandcustom
[ Data reported by the gt06 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery voltagebattery
- Battery levelbatteryLevel
- Blockedblocked
- Cardcard
- Chargingcharge
- Coolant temperaturecoolantTemp
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Driving timedrivingTime
- Engine loadengineLoad
- Fuelfuel
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- Geofencegeofence
- HDOPhdop
- Engine hourshours
- Humidityhumidity
- SIM ICCIDiccid
- Ignitionignition
- Photoimage
- Digital inputsinput
- Motionmotion
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Visible satellitessatVisible
- Stepssteps
- Throttlethrottle
- VINvin
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Doordoor
- FallfallDown
- Fatigue drivingfatigueDriving
- Faultfault
- Fuel leakfuelLeak
- Geofencegeofence
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Idlingidle
- Jammingjamming
- Lane changelaneChange
- Locklock
- Low batterylowBattery
- Low powerlowPower
- Movementmovement
- Overspeedoverspeed
- Power cutpowerCut
- Power offpowerOff
- Power onpowerOn
- Removalremoving
- SOSsos
- Tamperingtampering
- Temperaturetemperature
- Towingtow
- Unlockunlock
- Vibrationvibration
[ Protocol-specific attributes ]
absoluteCapacity · adcId · alarmJimi · barcode · batteryCell · batteryHealth · batteryStatus · batteryTemp · batteryVersion · bootReason · cameraChannelsBuiltin · cameraChannelsPeripheral · cameraStatus · cardStatus · chargeVoltage · clock · controllerFault · controllerStatus · current · currentChargeInterval · cycleIndex · dataDetails · dataType · deviceVersion · dltData · dltStatus · dltTime · dtcCount · engineStatus · eventData · eventFiles · externalBatteryCharge · externalBatteryCycles · externalBatteryLevel · fuelCapacitive · fuelConsumptionRate · fuelPulse · fuelSensorId · fuelTank · fuelUnit and 30 more
[ Other AOVX models ]
[ Other devices on the gt06 protocol ]
AOVX VL100 FAQ
Which port does the AOVX VL100 use to connect to TrackeraX?
The AOVX VL100 uses the gt06 protocol and connects to port 6023 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the AOVX VL100 send to the platform?
TrackeraX reads 38 parameters of the gt06 protocol on this device, for example: Armed, Battery voltage, Battery level, Blocked, Card. Each one can become a sensor or an alert.
Can I send commands to the AOVX VL100 from TrackeraX?
Yes. From the map or the device page you can send 4 command types to the AOVX VL100, including: Engine stop, Engine resume, Request photo, Reboot device.
Which alarms does the AOVX VL100 report?
TrackeraX recognizes these gt06 alarms: Accident, Door, Fall, Fatigue driving, Fault. Any of them can become an email, push or webhook notification.
How do I add the AOVX VL100 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6023 and create it in TrackeraX with its IMEI, choosing the AOVX VL100 model.
Try the AOVX VL100 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.