Armoli S400-M on TrackeraX
The Armoli S400-M is a GPS tracker that works with TrackeraX over the armoli protocol on port 6238. From the platform it accepts custom commands.
Technical sheet
- Brand
- Armoli
- Model
- S400-M
- Protocol
- armoli
- Port
- 6238
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6238 (armoli protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Armoli S400-M model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the armoli protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Driver ID (RFID / iButton)
driverUniqueId - G-sensor
gSensor - HDOP
hdop - Odometer
odometer - External power
power - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Protocol-specific attributes
alarms · maxSpeed
Other Armoli models
Try the S400-M on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.