Arusnavi 5 on TrackeraX
The Arusnavi 5 is a GPS tracker that works with TrackeraX over the arnavi protocol on port 6100. From the platform it accepts custom commands.
Technical sheet
- Brand
- Arusnavi
- Model
- 5
- Protocol
- arnavi
- Port
- 6100
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6100 (arnavi protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Arusnavi 5 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the arnavi protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Driver ID (RFID / iButton)
driverUniqueId - Engine load
engineLoad - Engine temperature
engineTemp - Fuel
fuel - Fuel level
fuelLevel - Fuel used
fuelUsed - HDOP
hdop - Engine hours
hours - Ignition
ignition - Digital inputs
input - OBD speed
obdSpeed - Odometer
odometer - External power
power - RPM
rpm - Satellites
sat - Throttle
throttle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
Protocol-specific attributes
adBlueLevel · axleLoad · callButton · canStatus · freq · llsLevel · llsTemp · motionStatus · pulses · tachographOdometer · tachographPower
Other Arusnavi models
Try the 5 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.