AutoFon SE+ PRO on TrackeraX
The AutoFon SE+ PRO is a GPS tracker that works with TrackeraX over the autofon protocol on port 6077. From the platform it accepts custom commands.
Technical sheet
- Brand
- AutoFon
- Model
- SE+ PRO
- Protocol
- autofon
- Port
- 6077
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6077 (autofon protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the AutoFon SE+ PRO model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the autofon protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - HDOP
hdop - Satellites
sat
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Other AutoFon models
Other devices on the autofon protocol
Try the SE+ PRO on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.