AVLSAT NEO2 on TrackeraX
The AVLSAT NEO2 is a GPS tracker that works with TrackeraX over the neos protocol on port 6183. From the platform it accepts custom commands.
Technical sheet
- Brand
- AVLSAT
- Model
- NEO2
- Protocol
- neos
- Port
- 6183
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6183 (neos protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the AVLSAT NEO2 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the neos protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Digital inputs
input - GSM signal
rssi
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Other AVLSAT models
Try the NEO2 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.