C2STEK FL10G on TrackeraX
The C2STEK FL10G is a GPS tracker that works with TrackeraX over the c2stek protocol on port 6181. From the platform it accepts custom commands. The server decodes 7 alarm types from this protocol, such as door, fault and low battery.
Technical sheet
- Brand
- C2STEK
- Model
- FL10G
- Protocol
- c2stek
- Port
- 6181
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6181 (c2stek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the C2STEK FL10G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the c2stek protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armed
armed - Battery voltage
battery - Door
door - Ignition
ignition
Alarms the protocol can report
- Door
door - Fault
fault - Low battery
lowBattery - Overspeed
overspeed - Power cut
powerCut - SOS
sos - Vibration
vibration
Other C2STEK models
Try the FL10G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.