CalAmp HMU-3640LB on TrackeraX

The CalAmp HMU-3640LB is a GPS tracker that works with TrackeraX over the calamp protocol on port 6082. From the platform it accepts custom commands.

Technical sheet

Brand: CalAmp
Model: HMU-3640LB
Protocol: calamp
Port: 6082

See the calamp protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6082 (calamp protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the CalAmp HMU-3640LB model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the calamp protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Driver ID (RFID / iButton) driverUniqueId
HDOP hdop
Ignition ignition
Digital inputs input
GSM signal rssi
Satellites sat

Protocol-specific attributes

acc · append · carrier · modem

Other CalAmp models

All CalAmp models

Try the HMU-3640LB on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.