Cellocator Cello CAN iQ on TrackeraX

The Cellocator Cello CAN iQ is a vehicle tracker with 4G LTE. It has an internal battery, a 1-Wire interface and CAN bus reading. In TrackeraX it connects over the cellocator protocol on port 6033 and accepts 2 commands from the platform.

Cellocator Cello CAN iQ

Technical sheet

Brand
Cellocator
Model
Cello CAN iQ
Protocol
cellocator
Port
6033

See the cellocator protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6033 (cellocator protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Cellocator Cello CAN iQ model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Hardware and connectivity

  • 1-Wire
  • Internal battery
  • CAN bus
  • 4G LTE

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output control outputControl
  • Custom command custom

Data reported by the cellocator protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Charging charge
  • Door door
  • Driver ID (RFID / iButton) driverUniqueId
  • Ignition ignition
  • Digital inputs input
  • Odometer odometer
  • Satellites sat
  • Firmware version versionFw
  • Hardware version versionHw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • IO elements (io1, io2…)

Alarms the protocol can report

  • Low power lowPower
  • Power cut powerCut
  • SOS sos

Protocol-specific attributes

mode

Other Cellocator models

All Cellocator models

Other devices on the cellocator protocol

Try the Cello CAN iQ on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.