Coban TK103A on TrackeraX

The Coban TK103A is a GPS tracker that works with TrackeraX over the tk103 protocol on port 6002. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 16 alarm types from this protocol, such as accident, geofence exit and harsh acceleration.

Technical sheet

Brand: Coban
Model: TK103A
Protocol: tk103
Port: 6002

See the tk103 protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6002 (tk103 protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Coban TK103A model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Request position positionSingle
Reporting interval positionPeriodic
Stop reporting positionStop
Reboot device rebootDevice
Firmware version getVersion
Power off powerOff
Device status getDeviceStatus
SOS alarm alarmSos
SOS number sosNumber
Output control outputControl
Device identification deviceIdentification
Deep sleep mode modeDeepSleep
Power saving mode modePowerSaving
Server connection setConnection
Set odometer setOdometer
Custom command custom

Data reported by the tk103 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Battery level batteryLevel
Blocked blocked
Charging charge
Door door
Fuel fuel
Ignition ignition
Odometer odometer
External power power
VIN vin

Numbered inputs and sensors

Inputs (in1, in2…)
Outputs (out1, out2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Accident accident
Geofence exit geofenceExit
Harsh acceleration hardAcceleration
Harsh braking hardBraking
Idling idle
Low battery lowBattery
Low power lowPower
Low speed lowspeed
Movement movement
Overspeed overspeed
Power cut powerCut
Removal removing
SOS sos
Tampering tampering
Temperature temperature
Vibration vibration

Protocol-specific attributes

batteryOverheat · batteryTemp · calibrationCapacity · cellTemp · chargeProtection · cumulativeVoltage · current · cycles · dischargeCapacity · dischargeProtection · equilibriumTemp · faultAlarm · gatherVoltage · hs · ls · maxCellVoltage · maxCellVoltageCount · maxTemp · maxTempCount · minCellVoltage · minCellVoltageCount · minTemp · minTempCount · panic · powerTemp · soc

Other Coban models

All Coban models

Other devices on the tk103 protocol

Try the TK103A on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.