Dragino LoRa devices on TrackeraX

The Dragino LoRa devices is an asset tracker that works with TrackeraX over the dragino protocol on port 6253. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as sos.

Dragino LoRa devices

Technical sheet

Brand
Dragino
Model
Dragino LoRa devices
Protocol
dragino
Port
6253
Category
IoT / BLE

See the dragino protocol

IoT, BLE and LoRaWAN asset trackers

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6253 (dragino protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Dragino LoRa devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the dragino protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltage battery
  • Humidity humidity

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • SOS sos

Try the Dragino LoRa devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.