Extremtrac ET-800 on TrackeraX
The Extremtrac ET-800 is a GPS tracker that works with TrackeraX over the blue protocol on port 6206. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as low power, overspeed and sos.
Technical sheet
- Brand
- Extremtrac
- Model
- ET-800
- Protocol
- blue
- Port
- 6206
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6206 (blue protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Extremtrac ET-800 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the blue protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Ignition
ignition
Alarms the protocol can report
- Low power
lowPower - Overspeed
overspeed - SOS
sos - Vibration
vibration
Other Extremtrac models
Other devices on the blue protocol
Try the ET-800 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.