FleetGuide protocol devices on TrackeraX
The FleetGuide protocol devices is a GPS tracker that works with TrackeraX over the fleetguide protocol on port 6254. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as low battery and low power.
Technical sheet
- Brand
- FleetGuide
- Model
- FleetGuide protocol devices
- Protocol
- fleetguide
- Port
- 6254
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6254 (fleetguide protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the FleetGuide protocol devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the fleetguide protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Ignition
ignition - Digital inputs
input - Motion
motion - Digital outputs
output - External power
power - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Low battery
lowBattery - Low power
lowPower
Protocol-specific attributes
fuelTemp · sensor
Other FleetGuide models
Try the FleetGuide protocol devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.