Flex API / VT310 on TrackeraX
The Flex API / VT310 is a GPS tracker that works with TrackeraX over the flexapi protocol on port 6235. From the platform it accepts custom commands.
Technical sheet
- Brand
- Flex API
- Model
- Flex API / VT310
- Protocol
- flexapi
- Port
- 6235
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6235 (flexapi protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Flex API / VT310 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the flexapi protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- HDOP
hdop - SIM ICCID
iccid - Ignition
ignition - OBD odometer
obdOdometer - OBD speed
obdSpeed - RPM
rpm - Satellites
sat - Firmware version
versionFw - VIN
vin
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Protocol-specific attributes
ax · ay · az · gx · gy · gz · imei · imsi · serial
Other devices on the flexapi protocol
Try the Flex API / VT310 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.