FMS500 StScan on TrackeraX

The FMS500 StScan is a GPS tracker that works with TrackeraX over the iotm protocol on port 6218. From the platform it supports output control, plus custom commands. The server decodes 1 alarm type from this protocol, such as jamming.

FMS500 StScan

Technical sheet

Brand
Fms500
Model
FMS500 StScan
Protocol
iotm
Port
6218

See the iotm protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6218 (iotm protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the FMS500 StScan model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output control outputControl
  • Custom command custom

Data reported by the iotm protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Acceleration acceleration
  • Axle weight axleWeight
  • Battery voltage battery
  • Battery level batteryLevel
  • Coolant temperature coolantTemp
  • Device temperature deviceTemp
  • Driver ID (RFID / iButton) driverUniqueId
  • Engine load engineLoad
  • Fuel fuel
  • Fuel consumption fuelConsumption
  • Fuel used fuelUsed
  • HDOP hdop
  • Engine hours hours
  • Ignition ignition
  • Motion motion
  • OBD odometer obdOdometer
  • OBD speed obdSpeed
  • Odometer odometer
  • External power power
  • RPM rpm
  • Satellites sat
  • Throttle throttle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • Jamming jamming

Protocol-specific attributes

absWarning · airBagWarning · axesX · axesY · axesZ · batteryVoltageWarning · brakeSystemWarning · buttonPresent · cargoWeight · checkEngineWarning · coolantFluidWarning · doorFL · doorFR · doorRL · doorRR · driverSeatBeltWarning · footBrake · handBrake · lowFuelLevelWarning · oilPressure · oilPressureWarning · ptoState · rotateDirection · tirePressureWarning · topSpeed · trailerId · transmissionOilLife · wheelSpeed · wiegand26

Other Fms500 models

All Fms500 models

Other devices on the iotm protocol

Try the FMS500 StScan on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.