Freematics ONE+ Model A on TrackeraX
The Freematics ONE+ Model A is a GPS tracker that works with TrackeraX over the freematics protocol on port 6170. From the platform it accepts custom commands.
Technical sheet
- Brand
- Freematics
- Model
- Freematics ONE+ Model A
- Protocol
- freematics
- Port
- 6170
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6170 (freematics protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Freematics ONE+ Model A model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the freematics protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Acceleration
acceleration - Battery voltage
battery - Coolant temperature
coolantTemp - Device temperature
deviceTemp - Engine load
engineLoad - HDOP
hdop - OBD speed
obdSpeed - RPM
rpm - GSM signal
rssi - Satellites
sat - Throttle
throttle - VIN
vin
Numbered inputs and sensors
- IO elements (io1, io2…)
Other Freematics models
Try the Freematics ONE+ Model A on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.