Gator M528 on TrackeraX
The Gator M528 is a vehicle tracker. In TrackeraX it connects over the gator protocol on port 6052 and accepts 6 commands from the platform.
Technical sheet
- Brand
- Gator
- Model
- Gator M528
- Protocol
- gator
- Port
- 6052
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6052 (gator protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Gator M528 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Request position
positionSingle - Set odometer
setOdometer - Speed limit
setSpeedLimit - Custom command
custom
Data reported by the gator protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Odometer
odometer - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Harsh cornering
hardCornering - Overspeed
overspeed
Protocol-specific attributes
key
Other Gator models
Try the Gator M528 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.