Genecko FOX on TrackeraX

The Genecko FOX is a GPS tracker that works with TrackeraX over the fox protocol on port 6105. From the platform it accepts custom commands.

Genecko FOX

Technical sheet

Brand
Genecko
Model
Genecko FOX
Protocol
fox
Port
6105

See the fox protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6105 (fox protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Genecko FOX model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the fox protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Fuel fuel
  • Digital inputs input
  • Odometer odometer
  • Digital outputs output
  • External power power
  • RPM rpm

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

Protocol-specific attributes

statusData

Try the Genecko FOX on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.