GlobalSat TR-616C1 on TrackeraX

The GlobalSat TR-616C1 is a GPS tracker that works with TrackeraX over the globalsat protocol on port 6043. From the platform it supports output control and dismiss alarm, plus custom commands. The server decodes 5 alarm types from this protocol, such as geofence, low power and overspeed.

Technical sheet

Brand: GlobalSat
Model: TR-616C1
Protocol: globalsat
Port: 6043

See the globalsat protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6043 (globalsat protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the GlobalSat TR-616C1 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Output control outputControl
Dismiss alarm alarmDismiss
Custom command custom

Data reported by the globalsat protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Battery level batteryLevel
Charging charge
HDOP hdop
Ignition ignition
Motion motion
External power power
Satellites sat

Numbered inputs and sensors

Inputs (in1, in2…)
Outputs (out1, out2…)

Alarms the protocol can report

Geofence geofence
Low power lowPower
Overspeed overspeed
Power cut powerCut
SOS sos

Other GlobalSat models

All GlobalSat models

Try the TR-616C1 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.