GoSafe G91I on TrackeraX

The GoSafe G91I is a vehicle tracker. In TrackeraX it connects over the gosafe protocol on port 6078 and accepts 1 command from the platform.

Technical sheet

Brand: Gosafe
Model: GoSafe G91I
Protocol: gosafe
Port: 6078

See the gosafe protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6078 (gosafe protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the GoSafe G91I model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the gosafe protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Driver ID (RFID / iButton) driverUniqueId
Geofence geofence
HDOP hdop
Engine hours hours
Ignition ignition
Odometer odometer
External power power
Satellites sat
VDOP vdop

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Inputs (in1, in2…)
Outputs (out1, out2…)
Temperature sensors (temp1, temp2…)

Protocol-specific attributes

eventData · eventStatus · obd · packetType · tagData

Other Gosafe models

All Gosafe models

Other devices on the gosafe protocol

Skypatrol SP4600

Try the GoSafe G91I on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.