GoTop MT201 on TrackeraX
The GoTop MT201 is a GPS tracker that works with TrackeraX over the gotop protocol on port 6050. From the platform it accepts custom commands. The server decodes 3 alarm types from this protocol, such as geofence entry, geofence exit and sos.
Technical sheet
- Brand
- GoTop
- Model
- MT201
- Protocol
- gotop
- Port
- 6050
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6050 (gotop protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the GoTop MT201 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the gotop protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - HDOP
hdop - GSM signal
rssi
Alarms the protocol can report
- Geofence entry
geofenceEnter - Geofence exit
geofenceExit - SOS
sos
Other GoTop models
- GoTop EQT-20
- GoTop G-TL-020
- GoTop TL216
- GoTop TL218
- GoTop TLT-2H
- GoTop Toplovo
- GoTop TV680
- GoTop TV806
- GoTop VT106
- GoTop VT310
- GoTop VT320
- GoTop VT340
Try the MT201 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.