GPS Marker M60 on TrackeraX
The GPS Marker M60 is a GPS tracker that works with TrackeraX over the gpsmarker protocol on port 6057. From the platform it accepts custom commands.
Technical sheet
- Brand
- GPS Marker
- Model
- GPS Marker M60
- Protocol
- gpsmarker
- Port
- 6057
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6057 (gpsmarker protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the GPS Marker M60 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the gpsmarker protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Digital inputs
input - Digital outputs
output - Satellites
sat
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Other GPS Marker models
Try the GPS Marker M60 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.