Kingwo NT07E on TrackeraX
The Kingwo NT07E is a GPS tracker that works with TrackeraX over the upro protocol on port 6095. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 17 alarm types from this protocol, such as accident, door and fault.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6095 (upro protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Kingwo NT07E model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Request positionpositionSingle
- Reporting intervalpositionPeriodic
- Disarm alarmalarmDisarm
- Reboot devicerebootDevice
- Custom commandcustom
[ Data reported by the upro protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
- Driver ID (RFID / iButton)driverUniqueId
- Fuelfuel
- Engine hourshours
- SIM ICCIDiccid
- Ignitionignition
- Odometerodometer
- External powerpower
- GSM signalrssi
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Doordoor
- Faultfault
- Fuel leakfuelLeak
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Low batterylowBattery
- Low powerlowPower
- Movementmovement
- Overspeedoverspeed
- Parkingparking
- Removalremoving
- SOSsos
- Tamperingtampering
- Temperaturetemperature
- Vibrationvibration
[ Protocol-specific attributes ]
data · fuelStatus · logisticsLock · networkType · nonMovementHours · obdPid · obdTraffic · odbTravel · serial · statusExtended · timezone · uptime
[ Other Kingwo models ]
[ Other devices on the upro protocol ]
Kingwo NT07E FAQ
Which port does the Kingwo NT07E use to connect to TrackeraX?
The Kingwo NT07E uses the upro protocol and connects to port 6095 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Kingwo NT07E send to the platform?
TrackeraX reads 12 parameters of the upro protocol on this device, for example: Battery level, Driver ID (RFID / iButton), Fuel, Engine hours, SIM ICCID. Each one can become a sensor or an alert.
Can I send commands to the Kingwo NT07E from TrackeraX?
Yes. From the map or the device page you can send 6 command types to the Kingwo NT07E, including: Engine stop, Engine resume, Request position, Reporting interval, Disarm alarm.
Which alarms does the Kingwo NT07E report?
TrackeraX recognizes these upro alarms: Accident, Door, Fault, Fuel leak, Harsh acceleration. Any of them can become an email, push or webhook notification.
How do I add the Kingwo NT07E to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6095 and create it in TrackeraX with its IMEI, choosing the Kingwo NT07E model.
Try the Kingwo NT07E on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.