Laipac Kamel S on TrackeraX

The Laipac Kamel S is a GPS tracker that works with TrackeraX over the laipac protocol on port 6048. From the platform it supports reboot device and request position, plus custom commands. The server decodes 10 alarm types from this protocol, such as geofence entry, geofence exit and low battery.

Laipac Kamel S

Technical sheet

Brand
Laipac
Model
Kamel S
Protocol
laipac
Port
6048

See the laipac protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6048 (laipac protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Laipac Kamel S model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Reboot device rebootDevice
  • Request position positionSingle
  • Custom command custom

Data reported by the laipac protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltage battery
  • GPS status gps
  • SIM ICCID iccid
  • Odometer odometer
  • Phone number phone
  • Firmware version versionFw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)

Alarms the protocol can report

  • Geofence entry geofenceEnter
  • Geofence exit geofenceExit
  • Low battery lowBattery
  • Overspeed overspeed
  • Power cut powerCut
  • Power off powerOff
  • SOS sos
  • Tampering tampering
  • Towing tow
  • Vibration vibration

Other Laipac models

All Laipac models

Try the Kamel S on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.