M2C protocol devices on TrackeraX

The M2C protocol devices is a GPS tracker that works with TrackeraX over the m2c protocol on port 6157. From the platform it accepts custom commands.

M2C protocol devices

Technical sheet

Brand
M2C
Model
M2C protocol devices
Protocol
m2c
Port
6157

See the m2c protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6157 (m2c protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the M2C protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the m2c protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltage battery
  • Digital inputs input
  • Odometer odometer
  • Digital outputs output
  • External power power
  • Satellites sat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

Try the M2C protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.