Maxtrack IDP-780 on TrackeraX
The Maxtrack IDP-780 is a vehicle tracker with 2G (GSM/GPRS). In TrackeraX it connects over the mxt protocol on port 6087 and accepts 1 command from the platform.
Technical sheet
- Brand
- Maxtrack
- Model
- IDP-780
- Protocol
- mxt
- Port
- 6087
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6087 (mxt protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Maxtrack IDP-780 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the mxt protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Charging
charge - Driver ID (RFID / iButton)
driverUniqueId - HDOP
hdop - Engine hours
hours - Ignition
ignition - Digital inputs
input - Odometer
odometer - Digital outputs
output - External power
power - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Other Maxtrack models
- Maxtrack G-100
- Maxtrack i-MXT
- Maxtrack MTC-700
- Maxtrack MTC-780
- Maxtrack MX-100
- Maxtrack MXT Series
- Maxtrack MXT-100
- Maxtrack MXT-100/101 (MaxPB)
- Maxtrack MXT-101
- Maxtrack MXT-130
- Maxtrack MXT-140
- Maxtrack MXT-140 (MaxPB)
Try the IDP-780 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.