Mictrack ES825 on TrackeraX
The Mictrack ES825 is a GPS tracker that works with TrackeraX over the mictrack protocol on port 6191. From the platform it accepts custom commands. The server decodes 6 alarm types from this protocol, such as geofence entry, geofence exit and low battery.
Technical sheet
- Brand
- Mictrack
- Model
- ES825
- Protocol
- mictrack
- Port
- 6191
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6191 (mictrack protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Mictrack ES825 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the mictrack protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Satellites
sat
Alarms the protocol can report
- Geofence entry
geofenceEnter - Geofence exit
geofenceExit - Low battery
lowBattery - Power off
powerOff - Power on
powerOn - SOS
sos
Other Mictrack models
- Mictrack 4G GPS Tracker MT600
- Mictrack 4G GPS Tracker MT600 Plus
- Mictrack 4G OBD Tracker MP90
- Mictrack Cat M1 & NB-IoT Asset Tracker MT821
- Mictrack Cat M1 & NB-IoT GPS Tracker MT825
- Mictrack ES821
- MicTrack B21
- Mictrack B2136
- Mictrack MP91
- Mictrack MT532
- Mictrack MT600
- Mictrack MT600-NB
Try the ES825 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.