MiniFinder Xtreme on TrackeraX

The MiniFinder Xtreme is a GPS tracker that works with TrackeraX over the tlt2h protocol on port 6030. From the platform it accepts custom commands. The server decodes 9 alarm types from this protocol, such as geofence entry, geofence exit and low battery.

Technical sheet

Brand: MiniFinder
Model: MiniFinder Xtreme
Protocol: tlt2h
Port: 6030

See the tlt2h protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6030 (tlt2h protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the MiniFinder Xtreme model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the tlt2h protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Door door
Ignition ignition
External power power

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Geofence entry geofenceEnter
Geofence exit geofenceExit
Low battery lowBattery
Low power lowPower
Overspeed overspeed
Power cut powerCut
SOS sos
Towing tow
Vibration vibration

Other MiniFinder models

All MiniFinder models

Other devices on the tlt2h protocol

Try the MiniFinder Xtreme on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.