Mobilogix protocol devices on TrackeraX

The Mobilogix protocol devices is a GPS tracker that works with TrackeraX over the mobilogix protocol on port 6216. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 7 alarm types from this protocol, such as geofence exit, low battery and low power.

Technical sheet

Brand: Mobilogix
Model: Mobilogix protocol devices
Protocol: mobilogix
Port: 6216

See the mobilogix protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6216 (mobilogix protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Mobilogix protocol devices model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Request position positionSingle
Reboot device rebootDevice
Custom command custom

Data reported by the mobilogix protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Blocked blocked
Charging charge
Ignition ignition
Motion motion
GSM signal rssi
Satellites sat

Alarms the protocol can report

Geofence exit geofenceExit
Low battery lowBattery
Low power lowPower
Overspeed overspeed
Power cut powerCut
Towing tow
Vibration vibration

Try the Mobilogix protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.