MTA MTA-02 on TrackeraX

The MTA MTA-02 is a GPS tracker that works with TrackeraX over the mta6 protocol on port 6028. From the platform it accepts custom commands.

MTA MTA-02

Technical sheet

Brand
MTA
Model
MTA-02
Protocol
mta6
Port
6028

See the mta6 protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6028 (mta6 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the MTA MTA-02 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the mta6 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltage battery
  • Device temperature deviceTemp
  • Fuel fuel
  • Fuel consumption fuelConsumption
  • Engine hours hours
  • Digital inputs input
  • Odometer odometer
  • External power power
  • GSM signal rssi
  • Satellites sat
  • Service odometer serviceOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

Protocol-specific attributes

engine · hours1 · hours2 · pedals · tank

Other MTA models

All MTA models

Other devices on the mta6 protocol

Try the MTA-02 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.