Noran NR028 on TrackeraX

The Noran NR028 is a GPS tracker that works with TrackeraX over the noran protocol on port 6053. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 4 alarm types from this protocol, such as geofence exit, overspeed and power off.

Technical sheet

Brand: Noran
Model: NR028
Protocol: noran
Port: 6053

See the noran protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6053 (noran protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Noran NR028 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Request position positionSingle
Reporting interval positionPeriodic
Stop reporting positionStop
Custom command custom

Data reported by the noran protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Fuel fuel
Odometer odometer

Numbered inputs and sensors

IO elements (io1, io2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Geofence exit geofenceExit
Overspeed overspeed
Power off powerOff
SOS sos

Other Noran models

All Noran models

Try the NR028 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.