Nyitech NT-183W on TrackeraX
The Nyitech NT-183W is a GPS tracker that works with TrackeraX over the nyitech protocol on port 6182. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.
Technical sheet
- Brand
- Nyitech
- Model
- NT-183W
- Protocol
- nyitech
- Port
- 6182
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6182 (nyitech protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Nyitech NT-183W model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the nyitech protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Fuel used
fuelUsed - Trip odometer
tripOdometer
Alarms the protocol can report
- Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Harsh cornering
hardCornering - SOS
sos
Try the NT-183W on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.