OKO protocol devices on TrackeraX

The OKO protocol devices is a GPS tracker that works with TrackeraX over the oko protocol on port 6152. From the platform it accepts custom commands.

Technical sheet

Brand

OKO

Model

OKO protocol devices

Protocol

oko

Port

6152

See the oko protocol

How to connect it to TrackeraX

1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
2. Set the server to the domain of your TrackeraX platform and the port 6152 (oko protocol).
3. Create the device in TrackeraX with its IMEI or identifier and choose the OKO protocol devices model.
4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

• Custom command custom

Data reported by the oko protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

• Digital inputs input
• External power power
• Satellites sat

Numbered inputs and sensors

• Analog inputs (adc1, adc2…)

Try the OKO protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.