Pacific Track PT10 on TrackeraX
The Pacific Track PT10 is a GPS tracker that works with TrackeraX over the pacifictrack protocol on port 6198. From the platform it accepts custom commands.
Technical sheet
- Brand
- Pacific Track
- Model
- PT10
- Protocol
- pacifictrack
- Port
- 6198
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6198 (pacifictrack protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Pacific Track PT10 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the pacifictrack protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Coolant temperature
coolantTemp - Engine load
engineLoad - Fuel
fuel - Fuel consumption
fuelConsumption - Fuel used
fuelUsed - Engine hours
hours - OBD speed
obdSpeed - Odometer
odometer - External power
power - RPM
rpm
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Protocol-specific attributes
barometer · bus · coolantLevel · currentGear · defLevel · fuelTankTemp · fuelUsedIdle · idleHours · intakeManifoldTemp · intercoolerTemp · oilLevel · oilPressure · oilTemp · transOilTemp · turboOilTemp
Other Pacific Track models
Try the PT10 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.