Plugin protocol devices on TrackeraX

The Plugin protocol devices is a GPS tracker that works with TrackeraX over the plugin protocol on port 6192. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as harsh acceleration and harsh braking.

Technical sheet

Brand: Plugin
Model: Plugin protocol devices
Protocol: plugin
Port: 6192

See the plugin protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6192 (plugin protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Plugin protocol devices model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the plugin protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Fuel fuel
Ignition ignition
OBD speed obdSpeed
Odometer odometer
External power power
RPM rpm
Satellites sat
Throttle throttle

Numbered inputs and sensors

Inputs (in1, in2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Harsh acceleration hardAcceleration
Harsh braking hardBraking

Try the Plugin protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.