Portman GT3101MG on TrackeraX
The Portman GT3101MG is a GPS tracker that works with TrackeraX over the portman protocol on port 6211. From the platform it supports engine stop and engine resume, plus custom commands.
Technical sheet
- Brand
- Portman
- Model
- GT3101MG
- Protocol
- portman
- Port
- 6211
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6211 (portman protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Portman GT3101MG model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Custom command
custom
Data reported by the portman protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Driver ID (RFID / iButton)
driverUniqueId - Fuel
fuel - Ignition
ignition - Odometer
odometer - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Other Portman models
Try the GT3101MG on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.