PST protocol devices on TrackeraX
The PST protocol devices is a GPS tracker that works with TrackeraX over the pst protocol on port 6207. From the platform it supports engine stop and engine resume, plus custom commands.
Technical sheet
- Brand
- PST
- Model
- PST protocol devices
- Protocol
- pst
- Port
- 6207
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6207 (pst protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the PST protocol devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Custom command
custom
Data reported by the pst protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Blocked
blocked - Ignition
ignition
Try the PST protocol devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.