Queclink GL601CEU on TrackeraX

The Queclink GL601CEU is a GPS tracker that works with TrackeraX over the gl601 protocol on port 6257. From the platform it accepts custom commands.

Technical sheet

Brand

Queclink

Model

GL601CEU

Protocol

gl601

Port

6257

See the gl601 protocol

How to connect it to TrackeraX

1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
2. Set the server to the domain of your TrackeraX platform and the port 6257 (gl601 protocol).
3. Create the device in TrackeraX with its IMEI or identifier and choose the Queclink GL601CEU model.
4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

• Custom command custom

Data reported by the gl601 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

• Battery voltage battery
• Battery level batteryLevel
• HDOP hdop
• Satellites sat

Other Queclink models

• Queclink GB100
• Queclink GB100CG
• Queclink GB100MG
• Queclink GL51CG
• Queclink GL53MGP
• Queclink GL100
• Queclink GL100M
• Queclink GL200
• Queclink GL300
• Queclink GL300A
• Queclink GL300M
• Queclink GL300N

All Queclink models

Other devices on the gl601 protocol

• GL601 protocol devices

Try the GL601CEU on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.