Reachfar RF-V20 on TrackeraX

The Reachfar RF-V20 is a personal tracker that works with TrackeraX over the watch protocol on port 6093. From the platform it supports sos alarm, low battery alarm and removal alarm, plus custom commands. The server decodes 7 alarm types from this protocol, such as fall, geofence entry and geofence exit.

Reachfar RF-V20

Technical sheet

Brand
Reachfar
Model
RF-V20
Protocol
watch
Port
6093
Category
Personal

See the watch protocol

Personal GPS trackers and GPS watches

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6093 (watch protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Reachfar RF-V20 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • SOS alarm alarmSos
  • Low battery alarm alarmBattery
  • Removal alarm alarmRemove
  • Alarm clock alarmClock
  • Request position positionSingle
  • Reporting interval positionPeriodic
  • Phonebook setPhonebook
  • Set time zone setTimezone
  • SOS number sosNumber
  • Reboot device rebootDevice
  • Power off powerOff
  • Text message message
  • Voice message voiceMessage
  • Indicator setIndicator
  • Silence time silenceTime
  • Custom command custom
  • Request photo requestPhoto

Data reported by the watch protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Audio file audio
  • Battery level batteryLevel
  • Heart rate heartRate
  • Photo image
  • Motion motion
  • GSM signal rssi
  • Satellites sat
  • Steps steps

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • Fall fallDown
  • Geofence entry geofenceEnter
  • Geofence exit geofenceExit
  • Low battery lowBattery
  • Power cut powerCut
  • Removal removing
  • SOS sos

Protocol-specific attributes

bloodOxygen · pressureHigh · pressureLow

Other Reachfar models

All Reachfar models

Other devices on the watch protocol

Try the RF-V20 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.