RITI TYN\_886 on TrackeraX

The RITI TYN\_886 is a GPS tracker that works with TrackeraX over the riti protocol on port 6071. From the platform it accepts custom commands.

RITI TYN\_886

Technical sheet

Brand
RITI
Model
TYN\_886
Protocol
riti
Port
6071

See the riti protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6071 (riti protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the RITI TYN\_886 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the riti protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Distance distance
  • External power power
  • Trip odometer tripOdometer

Protocol-specific attributes

mode

Try the TYN\_886 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.