RST MINI on TrackeraX
The RST MINI is a GPS tracker that works with TrackeraX over the rst protocol on port 6196. From the platform it accepts custom commands.
Technical sheet
- Brand
- RST
- Model
- RST MINI
- Protocol
- rst
- Port
- 6196
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6196 (rst protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the RST MINI model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the rst protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Driver ID (RFID / iButton)
driverUniqueId - HDOP
hdop - Ignition
ignition - Odometer
odometer - External power
power - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
Other RST models
- RST Hibrido 4G
- RST ISCA
- RST LCv5 4G
- RST MICRO
- RST Mini LC 4G
- RST Movel RF 4G
- RST ONE
- RST PLUS
- RST MINI 4G
- RST protocol devices
- RST SATÉLITE
Try the RST MINI on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.