Ruptela FM-Tco3 on TrackeraX

The Ruptela FM-Tco3 is a vehicle tracker with GPS/GLONASS. It includes a 1-Wire interface, CAN bus reading and an RS-232 port. In TrackeraX it connects over the ruptela protocol on port 6046 and accepts 10 commands from the platform.

Technical sheet

Brand: Ruptela
Model: FM-Tco3
Protocol: ruptela
Port: 6046

See the ruptela protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6046 (ruptela protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Ruptela FM-Tco3 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Hardware and connectivity

1-Wire
CAN bus
GLONASS
RS-232

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Output control outputControl
Firmware version getVersion
Configuration configuration
Firmware update firmwareUpdate
Server connection setConnection
Set odometer setOdometer
Custom command custom
Request photo requestPhoto

Data reported by the ruptela protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Charging charge
Device temperature deviceTemp
Driver ID (RFID / iButton) driverUniqueId
Fault codes (DTC) dtcs
Engine load engineLoad
Fuel fuel
Fuel consumption fuelConsumption
Fuel level fuelLevel
Fuel used fuelUsed
HDOP hdop
Ignition ignition
Photo image
Motion motion
OBD odometer obdOdometer
OBD speed obdSpeed
Odometer odometer
Mobile operator operator
External power power
RPM rpm
Satellites sat
Trip odometer tripOdometer

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Inputs (in1, in2…)
IO elements (io1, io2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Accident accident
GPS antenna cut gpsAntennaCut
Harsh acceleration hardAcceleration
Harsh braking hardBraking
Jamming jamming
Tampering tampering
Towing tow

Protocol-specific attributes

tagId

Other Ruptela models

All Ruptela models

Try the FM-Tco3 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.