Sanav CT-58A on TrackeraX
The Sanav CT-58A is a GPS tracker that works with TrackeraX over the sanav protocol on port 6051. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as low battery.
Technical sheet
- Brand
- Sanav
- Model
- CT-58A
- Protocol
- sanav
- Port
- 6051
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6051 (sanav protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Sanav CT-58A model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the sanav protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Charging
charge - Ignition
ignition
Numbered inputs and sensors
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Alarms the protocol can report
- Low battery
lowBattery
Other Sanav models
- Sanav CT-24
- Sanav CT-58
- Sanav GC-101
- Sanav GS-818
- Sanav GS-819
- Sanav GX-101
- Sanav MT-101
- Sanav MU-201
- Sanav MU-201S1
- Sanav QG-201
Try the CT-58A on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.