Starcom Helios on TrackeraX
The Starcom Helios is a vehicle tracker. In TrackeraX it connects over the starcom protocol on port 6190 and accepts 1 command from the platform.
Technical sheet
- Brand
- Starcom
- Model
- Starcom Helios
- Protocol
- starcom
- Port
- 6190
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6190 (starcom protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Starcom Helios model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the starcom protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armed
armed - Battery voltage
battery - Door
door - Fuel
fuel - Ignition
ignition - Odometer
odometer - External power
power - RPM
rpm - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Other Starcom models
Try the Starcom Helios on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.