StarLink Tracker on TrackeraX

The StarLink Tracker is a vehicle tracker with Bluetooth. It has an internal battery and CAN bus reading. In TrackeraX it connects over the starlink protocol on port 6136 and accepts 1 command from the platform.

StarLink Tracker

Technical sheet

Brand
Starlink
Model
StarLink Tracker
Protocol
starlink
Port
6136

See the starlink protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6136 (starlink protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the StarLink Tracker model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Hardware and connectivity

  • Internal battery
  • Bluetooth
  • CAN bus

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the starlink protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Armed armed
  • Battery voltage battery
  • Battery level batteryLevel
  • Device temperature deviceTemp
  • Driver ID (RFID / iButton) driverUniqueId
  • Fuel fuel
  • Engine hours hours
  • Ignition ignition
  • Odometer odometer
  • PDOP pdop
  • External power power
  • GSM signal rssi
  • Satellites sat
  • Visible satellites satVisible

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

Alarms the protocol can report

  • Geofence entry geofenceEnter
  • Geofence exit geofenceExit
  • Jamming jamming
  • Low battery lowBattery
  • Overspeed overspeed
  • Power cut powerCut
  • SOS sos
  • Towing tow

Protocol-specific attributes

batteryHealth · destination · external · fuel2 · reason · sensor · sensor1State · sensor2State · starter

Other Starlink models

All Starlink models

Try the StarLink Tracker on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.